Non-insulated crimp terminal for maxi blade fuses. Can be used in the maxi blade fuse module from the MTA modular fuse and relay system and in splashproof maxi blade fuse holders (if larger sized cable is to be used).
Terminals are crimped and/or soldered to the cable and then inserted into the slots in the underside of the module. Features on the terminals ensure error-proof insertion. The grey secondary locking cage on the module should then be pushed into place to prevent accidental terminal removal.
Please note: only 1 terminal per fuse required for the module as it has a common busbar for the input side.
Sold individually.
Further information
Tools to crimp this size terminal are expensive and not readily available so we recommend using suitable pliers to fold the tabs over the conductor and insulation.
.jpg)
.jpg)
.jpg)
