This Victron Energy Orion High Power DC-DC converter is a high output voltage converter for reducing the voltage from a 24V battery source to a nominal 12V output. This is useful if you have a 24V battery system and want to run higher load 12V appliances from it (which are more readily available than 24V appliances).
There is a wide input voltage range of 18-35V ensuring that the output voltage remains stable even during charging and discharging, and the output voltage is adjustable between 10-15V via a potentiometer. This model has a nominal current output of 25A but up to 5 units can be parallel connected to increase output. There is also a remote on/off facility, so you can activate or deactivate the converter manually using a low current switch, or automatically using a battery +ve signal (e.g. switched ignition feed). There is a very low off-load (standby) current of <15mA and the unit has 6.3mm blade/tab terminals for easy connection.
Commonly used in trucks and other agricultural & commercial vehicles, larger motorhomes, horseboxes and larger boats that have 24V starter and/or leisure battery systems.
Features
- High output
- Remote on/off
- Wide input voltage range
- Adjustable output voltage
- Under voltage shut-down (battery protection)
- Can be parallel connected for higher output
- Input voltage range: 18-35V DC
- Under-voltage shut down: 14V
- Under-voltage restart: 18V
- Adjustable voltage output: Yes
- Output voltage adjustment range: 10-15V (factory set at 13.2V)
- Efficiency: 96%
- Can be parallel connected: Yes (up to 5 units)
- Continuous output current: 25A
- Maximum output current: 35A
- Fan assisted cooling (temp. controlled): No
- Galvanic isolation: No
- No load current: <15mA
- Remote on/off: Yes
- Operating temperature range: -20 to +55°C (de-rate 3% per °C above 40°C)
- DC connection type: Faston 6.3mm tabs
- Weight: 0.7kg
- Overall dimensions: 160 (L) x 88 (W) x 65 (H) mm
Part Number : ORI241225020
.png)
.png)