Victron Energy GX Touch 50 Flush Mount

The Victron GX Touch 50 Flush Mount is an optional 5" touch-sensitive display that connects directly to the Victron Cerbo or Cerbo-S GX and gives you an instant overview of your system and the ability to adjust settings. Its ultra slimline waterproof construction with 3mm deep screen surround, easy flush-mounting design, and single cable connection make it a breeze to create a crisp, clean dashboard for all your Victron devices.

There are 2 mounting options:

• Sealed Mount - The display can be clamped to the recess from behind using the supplied brackets and rubber seal, providing a waterproof installation and allowing for easy removal.
• Glued Mount - Where rear access behind the mounting surface isn't available, the display can simply be glued in place using the pre-applied adhesive tape.

For both of the above mounting options the display can be either be fitted so the screen edge protrudes from the mounting surface (by 3mm), or a step can be routed out around the recess to allow the screen edge to sit fully flush with the mounting surface. A template is provided for the recess cut-out required.

Note: This display cannot be used on its own and must be used in conjunction with the Cerbo GX (product code P02815) or Cerbo-S GX (product code P03748)