Victron Energy ARGOFET 100-2 Battery Isolator / Charge Splitter
Victron Energy ARGOFET 100-2 Battery Isolator / Charge Splitter
Victron Energy ARGOFET 100-2 Battery Isolator / Charge Splitter
Victron Energy ARGOFET 100-2 Battery Isolator / Charge Splitter

Victron Energy ARGOFET 100-2 Battery Isolator / Charge Splitter

£81.00
(£67.50 Exc. VAT)
2 in stock
+
Product code
P04154
Brand
Current Rating
100A
Description

Victron Energy's Argofet Isolators allow simultaneous charging of two or more batteries from one alternator, or a single output battery charger, without connecting the batteries together. This means that current cannot flow between batteries, so discharging one cannot discharge the other, but they can still all receive a charge from a common charging source. These devices are sometimes referred to as charge splitters and are commonly used on larger boats that have multiple isolated battery banks (e.g. house/service, windlass, bow thruster etc.).

This Argofet has a maximum charge current rating of 100A (alternator output 100A max.) and can charge 2 isolated batteries simultaneously. It will work with 12V or 24V battery systems and auto-detects the system voltage when connected.

Virtually zero voltage drop

These Argofet splitters utilise Field-Effect Transistors (FET) and in contrast with charge splitters that use diodes, they incur virtually no voltage drop. For example, the voltage drop in the Argofets is less than 0.02V at low current and an average of 0.1V at higher currents. This maintains the voltage output of the alternator or battery charger and there is no need to increase the output voltage of the charging source to compensate for voltage drop (as long as care is taken to keep cable lengths short and of sufficient cross section to minimise voltage drop in the cable run). 

Alternator energise input

Some alternators need to detect a DC voltage on the B+ output terminal to start charging. Obviously, DC voltage will be present when the alternator is directly connected to a battery, however, fitting a battery isolator will prevent any return voltage/current from the batteries to the B+ terminal and the alternator won't start. These Argofet Isolators have a special current-limited energise input that will provide voltage to the B+ terminal when the ignition is activated or the engine run/stop switch closed, allowing the alternator to operate as normal.

Specifications
  • Nominal voltage: 12V or 24V
  • Maximum charge current: 100A
  • Maximum alternator current: 100A
  • Number of isolated batteries (or banks): 2
  • Connection type: M8 bolts and 6.3mm male terminals
  • Fixing points: Recesses for 5mm screws/bolts
  • Weight: 1.4kg
  • Overall dimensions: 200 (L) x 120 (W) x 65 (H) mm

Part Number : ARG100201020R

Manuals & Guides
Customer Reviews (0)

Be the first to Write a Review for this item!

Victron Energy is at the cutting edge of power management technology, offering a range of innovative and highly reliable products for every leisure application. This highly respected brand has a wealth of experience in the automotive, industrial, off-grid, marine, energy-storage and telecoms sectors.

Victron Energy