12-way standard blade fuse box with individual LEDs that light to indicate when a fuse has blown. Power input is via a common stud feeding each of the 12 circuits and the output connections are 6.3mm blade terminals on the sides of the unit. Supplied with a clear protective cover that latches into place and the base has 4 fixing holes for surface mounting.
Supplied with fixings and an 80 piece decal set for circuit identification.
Further information
The power input stud accepts a 5.3mm dia ring terminal.
Please note that in order for the red LED to light, a very small, limited current passes through the circuit so you may still register continuity across the fusebox terminals when a fuse is blown or no fuse is in place. This limited current is completely safe but may cause connected LED lights to glow faintly (since they require such low current to operate).
.png)