Scanstrut Flip Pro Max Dual USB-C Charger

The Scanstrut Flip Pro Max dual USB-C charger is designed for use with either a 12V or 24V DC input and features 2x 60W USB-C charging ports for maximum performance. It can charge at 36W on a 12V system or 60W on a 24V system, providing the fastest charging for modern laptops, large tablets, phones and other USB-C powered devices on board.

When the charger is not in use, the spring-loaded cap remains tightly closed against a foam gasket, protecting the USB-C ports from the elements. When charging, the cover is held open by pulling upwards until it locks in place, protecting your cables from damage. The USB-C ports feature a low-intensity red backlight to enable them to be found easily in the dark.

Featuring a super compact footprint, the Flip Pro Max is constructed from marine-grade, UV-resistant and corrosion-resistant materials and is IPX4 waterproof, making it wash-down ready. Installation is straightforward with the unit fitting into a standard 32mm panel hole and a foam gasket used to seal against the mounting face. An optional fit bezel and fixings are also supplied.

Input current draw is a maximum of 6A (10A fuse recommended) with a very low standby power consumption of 0.01W.

Features:

• Universal fit for any USB-C connector
• Fast charge (60W max) up to 2 devices at a time
• IPX4 waterproof with the cover closed
• Internal anti-corrosion protective coating
• UV resistant
• 316 stainless hinge and spring
• Optional fit bezel supplied
• Easy install, using standard 32mm (1.25") mounting hole

Further information

For charging laptops, a 24V system is required to achieve the full 60W output.