2-Way Econoseal III 070 Series waterproof automotive connector supplied as a pair of male and female housings with all terminals, seals and locking tabs.
This high quality connector is designed for automotive and marine applications where a water-tight connection is required. Its sealing reliability under harsh conditions is well proven and it is particularly suited for use in engine bay environments.
Male and female terminals are crimped around the seals and onto the cables and then inserted into the the connector housings. Yellow anti-backout locks are pushed into place after the terminals have been inserted, ensuring that the terminals cannot be dislodged during connection/disconnection.
Suitable for cables from 0.5 - 1.5mm².
Further information
Assembly tip: The cable seal should be crimped within the rear part of the terminal to retain it in the housing. Ensure that the terminals are not deformed before inserting into the housings.
The following tool should be used for crimping as it prevents the seals splitting and does not deform the terminals:
- No. connections: 2
- Current rating: 10A max. (per way)
- Cable size: 0.5-1.5mm²
- Terminal material: Tinned copper
- Connector body material: PA66
Part Number : 0-012-42 + 0-012-52
.jpg)
.jpg)
.jpg)