Blue Sea Systems 4367 Water-Resistant Accessory Panel - 15A Circuit Breaker, 3x Blank Apertures

This easy to install 4367 accessory panel from Blue Sea Systems features an illuminated 15A circuit breaker switch, sealing gasket and three blank apertures that can be populated with USB sockets, 12V power sockets, battery voltmeter etc., providing you with customisable charging and monitoring options.

The Carling Technologies illuminated, resettable circuit breaker switch protects against over-current conditions and allows power to the panel to be shut off to prevent parasitic drain. The switch has a silicone boot to prevent water entry and when used in conjunction with Blue Sea Systems accessories that also have foam sealing gaskets, the panel provides IP66 protection.

The panel is made from polycarbonate/ABS and is UV-stabilised, flame retardant and will not corrode, making it ideal for marine use and other applications involving harsh environments.

Can also be used with any other accessories that require a standard 29mm panel hole and have orientation 'flats' on their sides (may not be IP66 protected).

This panel is supplied with pre-terminated cables for connecting between the switch and accessories, and with screws to secure the panel to the mounting surface.

Suitable for 12V DC only.

Further information

Note that the switch terminals are marked LINE, LOAD & -ve (a ground connection is required for the switch illumination).