The 285-Series panel mount circuit breakers from Blue Sea Systems provide combined switching and circuit protection in one unit. Their IP67 rated design makes them fully waterproof and they are ignition protected, meaning they are safe for marine use around fuels on boats and in vehicles.
They have manual trip and reset functions so they can be used to switch/isolate the circuit if required, and the visible reset lever provides a clear indication of when the circuit is open or tripped. The 'trip-free' design also ensures that the circuit cannot be held 'ON' after a trip has occurred.
Available in ratings from 25-150A with a 3000A interrupt capacity (@48V), these breakers are suitable for a wide range of applications where a medium to high current draw is expected. Note: do not use as a switch where high inrush currents are expected.
These are intended for panel mounting on the front of a panel. If you require a circuit breaker that can be mounted behind a panel, consider the 187-Series circuit breakers.
Cable connections are via M6 studs on the rear of the unit.
Features
- 48V max. voltage
- 25-150A current ratings
- Interrupt capacity of 3000A@ 48V DC
- Manual trip and reset (can be used to isolate a circuit)
- Visible lever shows open condition
- Ignition protected
- IP67 rated (fully immersible for short periods)
- Trip-free design (cannot be held 'ON' after tripping)
- Intended for front panel mounting
Further information
Note that the connection studs are marked BAT and AUX. It is important for correct operation of the circuit breaker that the battery side is connected to BAT and the load side is connected to AUX.
.png)
.png)
.png)
.png)
.png)
.png)
.png)