Compact, low-profile power distribution box that connects directly to the battery +ve terminal post using the built-in terminal clamp. This box has locations for 2 x Midi/Strip link fuses and 8x Maxi blade fuses, providing multiple power take-off points and plenty of capacity for adding circuits in the future. There are separate hinged lids for the two compartments, an optional anti-vibration clamp (red with pre-fitted screws), jump starting tab to accept a croc clip and an integrated fuse puller.
The main power feed is from an M8 stud with washer and nyloc nut and there are 4 further cable entry points for connection to M5 studs which are also used to secure the Midi/Strip fuses. For connection to the Maxi blade fuses the box comes complete with 4x two-way connector blocks, 8x fuse crimp terminals (4.0-6.0mm²cable) and 4x terminal locking tabs (yellow).
Sold individually. Fuses not included.
Further information
The cable should be crimped to the terminals, the terminals inserted into the connector block and the terminal locking tab pushed into place. This then prevents the terminals from being accidentally removed.
.jpg)