Terminals to fit Anderson SB120 Double Pole Connector housings and PP120 Powerpole Connector Housings
Please select the terminal to match your cable size from the drop-down list.
Sold individually (two terminals required per housing for SB connectors and one per housing for PP connectors).
Further information
Terminal crimping - Terminals should be crimped to the cable conductor using a suitable tool. Alternatively, the terminals can be soldered to the conductor.
Terminal insertion - Insert the terminal into the connector housing so that the step at the end of the terminal slides along the surface of the sprung metal tab within the housing. Continue pushing the terminal into the housing until a sharp click is heard, which indicates that the tab has latched into place behind the step and the terminal is locked in place.
Terminal removal - Press the sprung metal tab in the housing fully flat using a suitable tool (so that it clears the step on the terminal body) and withdraw the terminal.
.png)
.png)
.png)
.png)
