Comet Florenz Microswitch Cold Water Tap With John Guest Push In Fittings

This Florenz cold water tap from Comet is a well-proven design with a high quality chrome-plated construction that will give many years of reliable service. Its folding spout makes it perfectly suited for use with campervan & motorhome sink and sink/hob combinations that have folding glass lids (e.g. SMEV 9222, SMEV 9722 etc.) and it's the 'go to' tap for many professional converters.

The tap body uses a ceramic cartridge for zero maintenance with fine control of water flow, and the built-in microswitch can be used to activate a submersible or in-line water pump from a 12V DC supply. The tap can also be used with in-line pumps that are operated via a pressure switch, and the microswitch should be left disconnected in this case. The spout features a water aerator that can be removed for cleaning using the supplied tool.

The Florenz can be fitted to a 34-40mm diameter tap hole and the cold water connection has a push-in fitting for 12mm John Guest semi-rigid tube.

Features

• Cold water only
• Folding spout, ideal for sinks with folding glass lids
• Built-in microswitch
• High quality construction
• Ceramic cartridge
• Water aerator
• Fine regulation of water flow
• Fits JG 12mm semi-rigid tube
• 3 bar (43 psi) max. pressure

Further information

A hot/cold mixer version of this tap can be found here

Pumps for use with this tap can be found here

Flexible PVC hose for use with this tap can be found here.

Microswitch wiring instructions: Connect one wire to your +12V fused battery supply and the other wire to the +12V connection of your water pump. It doesn't matter which way round the wires are connected.